Raspberry Pi 2

Active

Primary development and hardware verification platform. VAOS runs natively on Raspberry Pi 2 (BCM2836, ARM Cortex-A7 quad-core 900MHz). Verified on real hardware: kernel boot, FAT32 read/write, VTP transfer protocol, OTA updates, HDMI framebuffer (RGB565), UART RX IRQ, SMP load balance, ELF32 loader, process manager, preemptive scheduler, SVC syscalls.

✓ Hardware Verified

This platform has been verified on real hardware. The VAOS kernel boots and runs on Raspberry Pi 2.

Architecture:: ARMv7
SoC:: BCM2836
CPU:: Cortex-A7
RAM:: 1024 MB
First boot:: 2026

Ported by

Valentin Condei

Core Developer — VOENSYS

Current maintainers

V
Valentin Condei— Core Developer — VOENSYSsince 2026

What's been done on this platform

Port
Initial ARMv7 port — kernel boot on BCM2836
Valentin Condei
Driver
SD card driver (FAT32 read/write)
Valentin Condei
Driver
UART driver (BCM2836 PL011)
Valentin Condei
Driver
HDMI framebuffer driver (RGB565)
Valentin Condei
Documentation
VAOS architecture and module ABI documentation
Valentin Condei
Testing
Hardware verification on Pi 2 — boot, FAT32, OTA, HDMI
Valentin Condei